Replacement fastener kit for the front and rear C5/C6 wheel bearings. This kit uses 12 point reduced head grade 12.9 (175, 000 PSI) M12 cap screws, Nordlocs, and a M14 Nyloc nut with hardened washer for the lower ball joint. Can be used with the OE or our new HD bearings. The OE Torx head bolts loosen, and the head strips out. With these you use a standard 12mm 12 point socket and they allow proper torque for greater reliability and ease of assembly and removal. Can be used many times. 4 kits are needed per Car.
MSRP: $40.00 Our Price: $36.00 Savings: $4.00 (10%) Buy Now
97-08 Front HD Racing Bearing - Except ZR1 & 09-12 Z06
Will Fit C5, C6
Interchangeable from Front to Rear
10 Micron Run-out
You gain increased stiffness for better brake performance under high loads. Under race competitive use, you may go an entire season without replacement. This unit is designed to provide a high stiffness during cornering, reducing piston knock-back and the need to trail brake. It's also designed for durability and to maintain preload at a sustained loading of 1.2g. All this adds to faster lap times and better driver feedback.